CAPO
Fant CAPO SIXER1 Samurai, Jimney 1/6 Rc Car Hood Switch
Fant CAPO SIXER1 Samurai, Jimney 1/6 Rc Car Hood Switch
Regular price
$49.00 USD
Regular price
$63.00 USD
Sale price
$49.00 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
The change kit is used to add a hood opening device in the car, which is convenient to open the hood by toggling the switch from the inside of the main driver fender.
Note: This is a remote control car toy accessory, not suitable for real cars
Pay attention to the strength when tightening the 1.m2 × 8 fixing screw. If it is too tight, the trigger will be inflexible, and even cause the wire mouth to slip. Because the back is the hinge fixing screw of the car shell, using the same hole position will push it to the hinge fixing screw.
2. First fix the trigger section steel wire, then fix the trigger end on the car shell, and adjust the steel wire tightness through the buckle of the cover.
3. The steel wire at the buckle end of the machine cover is pressed and fixed by the aluminum buckle, and the steel wire can be tightened a little.
Note: This is a remote control car toy accessory, not suitable for real cars
Pay attention to the strength when tightening the 1.m2 × 8 fixing screw. If it is too tight, the trigger will be inflexible, and even cause the wire mouth to slip. Because the back is the hinge fixing screw of the car shell, using the same hole position will push it to the hinge fixing screw.
2. First fix the trigger section steel wire, then fix the trigger end on the car shell, and adjust the steel wire tightness through the buckle of the cover.
3. The steel wire at the buckle end of the machine cover is pressed and fixed by the aluminum buckle, and the steel wire can be tightened a little.
